Fork Mounted Sweeper
The Fork Mounted Sweeper is a quick and easy solution for re-heaping your loose granule products such as sand, top soil, grain or similar. Available in 4 width combinations and 2 brush row combinations.
- Free Delivery in 2 to 3 days
Features
- Lighter Duty Tasks | The ECO Range - The 5 row sweeper is ideal for those tasks where volume and weight is minimal.
- Heavy Duty Tasks | The Standard Range - The 8 row sweeper is best suited where there are large open spaces and / or heavier masses to sweep.
- Interchangeable blue nylon brushes
- Facility to hang Fork Mounted Magnet from the frame
- Maximum fork section 150 x 60 mm at 683mm centres
- Zinc plated twist screws for safe attachment to truck
- Painted bright orange for safety
Operation
- Position the forks to the correct distance apart to locate into fork hoops.
- Drive forks into fork hoops until the tip of the forks touches the stop plate, firstly ensuring that the twist screws are suitably retracted.
- Once the forks are fully inserted tighten the twist screws onto the fork blade ensuring that they are fully tightened.
- The attachment is now ready for use.
- Lower the Brush so that the bristles are in contact with the sweeping surface and drive at a slow jogging pace and in a straight line. Distance will depend on sweeping surface and type of debris being swept.
- Once the desired distance has been reached, lift the brush clear of the sweeping surface and reverse to cover the same straight line run again (this is optional to the user dependent on surface, debris and desired result).
- Continue point 5 & 6 until area has been cleared.
- Approached the individual piles at right angles to the sweeping direction so as to create a single heap.
- This heap is now ready for collection/scooping to your wasted container.
OPERATE LEFT/RIGHT HAND SWEEP: If this option is chosen (normally for clearing single track roads/access routes) the following instructions need to be adhered to after step 1 above:
- Insert the sweep angle into the slot on the desired side of the stop plate.
- Insert the safety clip through the hole on the vertical pin over the sweep plate.
- Drive forks into fork hooks until the tip of one fork touches the stop plate and the other against the sweep angle, firstly ensuring that the twist screws are suitably retracted.
- Manual adjustment maybe required to truly align the unit.
- Once the forks are fully inserted tighten the twist screws onto the fork blade ensuring that they are fully tightened.
- The attachment is now ready for use.
Options
Centre of Gravity - mm
Max Fork Size - mm
Fork Spread - mm
Weight - kg
Total Price - £ (£)
* FREE Delivery in 2 to 3 days *
Please note that delivery to the following postcodes will incur additional delivery costs. Please contact us for details.
WALES - CF, NP, SA (14-20, 31-48, 61-73, 99)
DEVON/CORNWALL - EX, PL, TR, TQ
LONDON - EC, ES, SW, W, WC
SCOTLAND - AB10-16, 21-25, 30, 39, 99, DD, DG, PA1-19, PH1-16
SCOTTISH HIGHLANDS - AB31-38, 45-51, 56, IV1-28, 30-32, 36, 40-52, 55, KA27-28, KW1-17 PA21-41, PH17-26, 30-41, 42-44, 49-50
(S25)
